Get Paid for blogging

To recover from the system failure using Automated system Recovery.

 1. Make sure you have the following items before you begin the recovery procedure.

* Your previously created Automated System Recovery (ASR) floppydisk.

* Your previously created backup media.

* The original Operating System installation CD.

2. Insert the original Operating System installtion CD into CD-ROM.

3. Restart your computer. If prompted to press a key in order to start computer from CD, press the appropriate key.

4. Press F2 when prompted during the text-only mode section of setup. You will be prompted to insert the ASR floppy disk you have previously created.

5. Follow the directions on the screen.

To Create an Automated System Recovery set using Backup.

* Open Backup.

                  The backup utility Wizard starts by default, unless it is disabled.

* Click the Advanced Mode button in Backup utility Wizard.

* On the Tools menu, click ASR Wizard.

* Follow the instructions that appear on your screen.

Important

* You will need a blank 1.44 MB floppy disk to save your system settings & media to contain the Backup files.

Note:

To start backup, click Start, point to All Programs, point to Accessories, point to System Tools, & then click Backup.

Only those system files necessary for starting up your system will be backed up this procedure.